LOADING
Silex SIL16 A1 – 2mm
August 5, 2019
DuPont™ NOMEX 410 – 0.76mm
November 7, 2019
Smooth ABS Black – 1.5mm
Acrylonite Butadiene Styrene
£0.00
To get an instant quote for your custom parts, please select your currency and follow steps 1 to 4.
- High Rigidity And Good Impact Strength Down To Low
- Good Thermoforming Properties For Good Definition
- Excellent Electrical Properties, Moisture And Cree
4 Sheets In Stock
Description
Acrylonitrile Butadiene Styrene (ABS) is the polymerization of Acrylonitrile, Butadiene, and Styrene monomers. Chemically, this thermoplastic family of plastics is called “thermopolymers”, in that they involve the combination of three different monomers to form a single material that draws from the properties of all three.
Features
- High Rigidity And Good Impact Strength Down To Low
- Good Thermoforming Properties For Good Definition
- Excellent Electrical Properties, Moisture And Cree
Recommended Uses
- Automotive
- Aircraft applications
- Encasings
Physical Properties
| Properties | Test Method | Units | Value |
|---|---|---|---|
| Density | ISO 1183 | g/cm³ | 1.06 |
| Water absorbtion - at saturation in air of 23°C / 50% R.H. | ISO 62 | % | 0 |
| Water absorbtion - at saturation in water 23°C | ISO 62 | % | 0.7 |
Mechanical Properties
| Properties | Test Method | Units | Value |
|---|---|---|---|
| Tensile stress at yield and break | ISO 527 | N/mm² | 45 |
| Elongation at break | ISO 527 | % | 25 |
| Tensile modulus of elasticity | ISO 527 | N/mm² | 2500 |
| Compression test - 1% strain after 1,000 hrs | ISO 899 | N/mm² | 17 |
| Charpy impact strength - Notched | ISO 179-1/1eU | KJ/mm² | 14 |
| Charpy impact strength - Unnotched | ISO 179-1/1eU | KJ/mm² | no break |
| Ball indentation hardness | ISO 2039 | N/mm² | 85 |
| Shore hardness D | ISO 2039 | D | 82 |
| Coefficient of frition to steel (12) | ISO 8295 | - | 0.5 |
Thermal Properties
| Properties | Test Method | Units | Value |
|---|---|---|---|
| Melting temperature | ISO 3156 | °C | 105 |
| Thermal conductivity at 23°C | ISO 22007.2 | W/9km) | 0.15 |
| Deformation temperature(15) | ISO 75 | °C | 85 |
| Coefficient of linear thermal expansion - average value between 23 and 60°C | ISO 11359 | m(m.K) | 90 |
| Max. allowable service temperature in air - Continuously (17) | - | °C | 90 |
| Max. allowable service temperature in air - Short periods (18) | - | °C | 100 |
| Minimum service temperature (19) | - | °C | -20 |
| Flamability - Oxygen inde | ISO 4589 | % | 19 |
| Flamability - according to UL 94 (3/6 thickness) | UL94 | - | HB |
Electrical Properties
| Properties | Test Method | Units | Value |
|---|---|---|---|
| Dilectrical constant at 1 MHz | ISO 250 | - | 3.3 |
| Dielectric strength | ISO 243 | KV/mm | 20 |
| Volume resistivity | ISO 93 | Ωcm | 10/16 |
| Dissipation factor tan ∆ at 1 MHz | ISO 250 | - | 0.02 |
Materials Direct
Precision cut technical materials fast
We’re available to assist you for your next project
A division of Universal Science UK
www.universal-science.com
Related products
- Add to basket
- High Rigidity And Good Impact Strength Down To Low
- Good Thermoforming Properties For Good Definition
- Excellent Electrical Properties, Moisture And Cree
Reviews
There are no reviews yet.