Tapes and Adhesives
Tapes & Adhesives can be converted into bespoke components used in the protection of electronics.
Showing all 14 results
-
Select Options
- Aluminium Mesh Carrier
- Thermal conductivity = 1.4 W/ mK
- Lap Shear Al-Al @ 25°C, psi = 70
-
Select Options
- Double-sided, thermal adhesive tape consisting of a KAPTON polyimide film and silicone rubber
- Delivers excellent electrical isolation in combination with good thermal connection
- Pressure sensitive application improving to maximum bond strength after 24 hours
-
Select Options
- Electrically isolating, acrylic thermal tape
- Conformability fills micro air voids between mating surfaces reducing thermal resistance
- Allows sufficient heat exchange between component and cooling mechanism
-
Select Options
- Electrically isolating, acrylic thermal tape
- Conformability fills micro air voids between mating surfaces reducing thermal resistance
- Allows sufficient heat exchange between component and cooling mechanism
-
Select Options
- Electrically isolating, acrylic thermal tape
- Conformability fills micro air voids between mating surfaces reducing thermal resistance
- Allows sufficient heat exchange between component and cooling mechanism
-
Select Options
- Electrically isolating, acrylic thermal tape
- Conformability fills micro air voids between mating surfaces reducing thermal resistance
- Allows sufficient heat exchange between component and cooling mechanism
-
Select Options
- High bond strength from -67°F to 250°F
- High fracture toughness and peel strength
- Short cure time at 225°F (90 minutes)
- Material Per Datasheet must be Refrigerated
-
Select Options
- Strong and reliable long-term bonding
- Easy to handle
- Professional finish without mechanical fasteners
-
Select Options
- Up to 205 °C short-term heat resistance
- High shear strength to resist slippage and edge lifting
- Special polycoated kraft layflat liner for increased dimensional stability
-
Select Options
- Up to 177 °C short-term heat resistance
- strong holding power to various silicone surfaces
- Dielectric Strength = 8000 v
-
5557 Tape – 0.259mm | 3M™
SKU: 93736Select Options- Highly absorbent, paper backing to transport water to show indication
- Does not falsely indicate water contact in high humidity exposures
- Performance not degraded by high humidity exposure
-
Select Options
- High mechanical strength
- Improved surface wet-out for rough surface/LSE substrates
- Excellent shock performance
-
Select Options
- Good thermal conductivity (>1.5W/m-K)
- Excellent dielectric performance
- Low thermal impedance
- Good and reliable adhesion performance to Al and SS
- Vibration damping
-
Ttape 1050A – 0.05mm | Laird
SKU: 94291Select Options- Thermal Conductivity = 0.7 W/m°K
- High Mechanical Strength
- RoHS Compliant
